by Design Guide
by Site Map
EIS Slab-to-Slab / Slab-to-Wall
EIS Spec-Data Sheet (.pdf)
Fire Rated EIS Spec Data (.pdf)
EIS 3-Part Spec (.docx)
Multi-Product Spec (.doc)
MM Gel-Poxy Adhesive (.pdf)
Maintenance Guidelines (.pdf)
103 Alkali-Aggregate Reaction
110 Concrete Surface Prep.
111 Ferrous Metal Surface Prep.
121 Sound Attenuation
122 R-Value
123 Silicone vs. Urethane
129 Tech Bulletin - Snow Removal Guideline
EXPANDING IMPREGNATED SEISMIC FOAM SYSTEM (EIS)
FIRE RATED AND NON FIRE RATED MODELS
- Specifications are described
on the next page.
TIP: Click now to select this model.
- Specifications are described
on the next page.
TIP: Click now to select this model.
- Specifications are described
on the next page.
TIP: Click now to select this model.
- Specifications are described
on the next page.
TIP: Click now to select this model.
- Specifications are described
on the next page.
TIP: Click now to select this model.
- Specifications are described
on the next page.
TIP: Click now to select this model.
- Specifications are described
on the next page.
TIP: Click now to select this model.
- Specifications are described
on the next page.
TIP: Click now to select this model.
- Specifications are described
on the next page.
TIP: Click now to select this model.
- Specifications are described
on the next page.
TIP: Click now to select this model.
- Specifications are described
on the next page.
TIP: Click now to select this model.
- Specifications are described
on the next page.
TIP: Click now to select this model.
- Specifications are described
on the next page.
TIP: Click now to select this model.
- ± 50% movement capability.
- Vehicular/Traffic Grade Silicone Surface Seal.
- Conforms to irregular openings reducing the risk of costly water damage.
- System generates constant outward pressure providing a permanent weather-tight seal.
- Epoxy bonded acrylic impregnated foam block provides additional point load support.
- Permanently elastic and will expand and accommodate the concrete structures movement under extreme weather conditions.
- Resistant to UV, ozone, acid rain, wind driven rain and extreme temperatures.
- Easy to install, no fasteners or anchors.
- Will not bleed like asphalt or bitumen based impregnated products.
- Resilient and flexible to -39°F.
- Provides interior vapor, dust, acoustical, air and sound-damping control.
- Fire Barriers - MM expansion joint systems are available with appropriate fire ratings.
Home
Site Map
Help
Search
Toll Free Domestic: 1-800-241-3460 International: 1-706-824-7500
50 MM Way - PO Box 98 - Pendergrass, GA 30567 info@mmsystemscorp.com
Copyright © 2010 MM Systems. All rights reserved.