by Design Guide
by Site Map

SPLIT SLAB SEISMIC FOAM SILICONE SEALING SYSTEM (SSF)

 

SSF Main Page | Switch to SSF-C

SSF	Total Movement		Joint Opening "A"						Installation Range "A"
			Thermal Min.		Thermal Max.		Safety Max.		Minimum		Maximum
SSF-200	2.00	51	1.00	25	2.00	51	3.00	76	1.50	38	1.75	44
SSF-300	3.00	76	1.50	38	3.00	76	4.50	114	2.50	64	2.75	70
SSF-400	4.00	102	2.00	51	4.00	102	6.00	152	3.50	89	3.75	95
SSF-500	5.00	127	2.50	64	5.00	127	7.50	191	4.50	114	4.75	121
SSF-600	6.00	152	3.00	76	6.00	152	9.00	229	5.50	140	5.75	146

Dimensions shown in inches (bold) and millimeters.
Waterproofing Membrane Compatability - confirm with manufacturer grade of rubber to be used on waterproofing splice flap.

 

• Traffic grade silicone surface seal provides primary waterproofing protection.
• Epoxy bonded acrylic impregnated foam block provides additional point load support.
• Heavy-duty structural side frame with protective interlocking stainless steel retaining cap.
• Leg height adjusts to accommodate pavers, topping slabs and other surfaces.
• Capable of thermal, seismic, vertical and lateral shear movement.
• ADA compliant design provides pedestrian friendly walking surface.
• Continuous EPDM Rubber Gutter ties directly into primary deck waterproofing.
• Available with 5-year warranty through Certified Contractor Network.
• Compatible with most waterproofing deck membranes.
• Fire Barriers - MM® expansion joint systems are available with 2 to 4 hour fire protection ratings.